The design of Triple Function Substations in combination with RELaTED technologies

Ultra-Low temperature DH introduces multiple benefits at the network level, as the reduction of heat losses and the improvement of heat generation efficiency…

Ultra-Low temperature district heating introduces multiple benefits at the network level, as the reduction of heat losses and the improvement of heat generation efficiency. ULT DH also facilitates the integration of low temperatures renewable energy sources and waste heat into the district heating network. Renewable heat sources as solar thermal and heat pumps can be coupled to the district heating network and the buildings through specially designed district heating substations.

During the development of the RELaTED project, several Triple Function Substations (3FS) have been evaluated and designed. Those were investigated in different versions, connection schemes configurations and operating modes depending on the district heating characteristics, the building types and the heating technologies used.

This includes the design of Triple Function Substations (3FS) in combination with different RELaTED technologies:

  • Building an Integrated Low-Temperature Solar Thermal system (BILTST).
  • District Heating Reversible Heat Pump (DHRHP).
  • Microbooster Heat Pump.

As the project highlighted, there is not such a single 3FS substation design. The unit main design characteristics depend not only on the load levels but also on the type of DH networks and the type of heating system the 3FS is placed in. The possible concept designs of the 3FS were grouped in the following case scenario:

During the development of the RELaTED project, several Triple Function Substations (3FS) have been investigated in different versions, connection schemes configurations and operating mode.

ULTDH connected to:

  • Existing buildings with:
    • DHRHP and BILTST (Demo in Taastrup (DK)
    • DHRHP (Demonstration in Taastrup (DK)
  • nZEB buildings with:
    • DHW Microboosters and BILTST (Demonstration in Taastrup (DK)
    • DHW Microboosters alone (Demonstration in Taastrup (DK)

LTDH connected to:

  • Existing buildings:
    • With BILTST (Demonstration in Belgrade)
    • Without BILTST (Standard case)

System and flow diagrams for each case were proposed. In the case of a 3FS for ULTDH connected to existing buildings equipped with BILTST, a maximum of eleven possible theoretical combined operational modes were found. In this specific case, a more detailed Process and Instrumentation Diagram (P&ID) was initially proposed.

Demo sites

Belgrade (Serbia). The demand specification of a Two-Function Substation (2FS) specifically adapted for the Belgrade primary school demonstration site was prepared. Control strategy and process diagrams were developed, and a mechanical design was proposed. The unit is being currently built, and it is expected to enter into operation before the end of Q3 2021.

Taastrup (Denmark). The demand specification for three different district heating substations was prepared. This includes process and instrumentation diagrams, flow chart, control specifications, bill of materials and mechanical design. All units were installed in Taastrup, and they are operating on the same heating grid but alternative applications.

Download the complete document >>

In the news

New project building on the results of RELaTED

The RELaTED project partners Inaventa Solar has recently started a new project, DisolBat (distributed solar and “blue batteries”), which builds on the results of its international collaboration with RELaTED.

New solutions for heating to test ULTDH in Spain

The Swedish manufacturer NIBE recently sent to Spain some specially developed heat pumps and hydraulic modules that will contribute to transforming a DH network into a ULT network. These components and solutions will heat and cool 2 buildings in a corporate building complex in the RELaTED demonstration site of Iurreta, Spain, owned by the Basque Government.